This is the 1969 Road Runner of Simon Boot

I totally went through this car over the winter of 2004, doing everything from new engine,gear box,rear diff and springs also roll cage and wiring

Simon went 12.06 over the 1/4mile on the engine and 11.2 with a sniff of gas on DOT tyres and 3.25to1 gears

The Chrysler is based on a 400ci block but I used a stroker crank to get 453ci. The Edelbrock ali heads and 850dp Holley carb feed the engine, plus I used the biggest hydraulic cam I thought I could get away with on a street driven car

You could have a basic roll cage like this for as little as £380 including VAT

©john-sleath.com